Summit 32 X 120 Gap Bed Engine Lathe


Summit 32" X 120" Gap Bed Engine Lathe

Stock Number: 2104

Summit 32-4X120

Serial No. 1998398      Age: 1998

Condition: Excellent

Price: $27,500


Key Features: Camlock spindle A2-11 Heavy walled hardened and ground spindle with 4.1" through-bore turns in stress-free precision tapered roller bearing system. Dial control gives 20 spindle speeds. 20" wide bed engineered for rigidity, a massive casting with integral ways hardened for long service life Feed box cuts wide range of American Standard, Metric, Module and DP threads. Pushbutton controlled rapid traverse, longitudinal or cross. Simple, convenient controls for safer, faster operation. Automatic oiling systems lubricate headstock, feed box and carriage. Quality construction throughout, with hardened and ground Cr/Mo gears and alloy steel shafts mounted on ball or roller bearings. Front mounted spindle stop/start, forward/reverse levers. Automatic longitudinal stop systems, with 6 stops that sequentially disengage feed at predetermined points with repeatable precision. Tailstock that can be coupled to the carriage, which allows using the tailstock for power drilling, reaming and boring applications.

                                                                                                                                                                        View a video of Summit 32 X 120 Gap Bed Engine Lathe
Click to view larger photo


SpecificationDescription
Swing over bed32"
Swing in gap43.7"
Gap Length12"
Max distance between centers120"
Max turning diameter over cross slide22"
Spindle bore4.1"
Spindle Motor25 HP
Tailstock quill diameter4.1"
Tailstock quill travel8.6"
Part weight capacity (with steady rest)7700 lbs
Part weight capacity (without steady rest)5500 lbs
Spindle speeds (12)5-800 rpm
Spindle NoseA2-11
Headstock centerMT6
Threading (80, TPI).25 - 80 TPI
Threading (44, mm)1-176 mm
Long feeds (114).0022" - .6" ipr
Cross Feeds (114).0007 to .017" ipr
Cross Slide travel16.9"
Compound rest travel7.8"
Bed width19.4"

Equipped With:
Steady Rest with 3-Point Roller Bearings Follow Rest with Roller Bearings Dual Rate Geared Tailstock 31.5" 4-Jaw Chuck Taper Attachment Metric / Inch Threading Power Rapid Carriage Traverse Carriage Spindle Controls Coolant System w/ front & rear trough Full length Chip Pan Inch/Metric Dial Graduations Load Meter Worklight 440V, 3PH




HomeIndexContactView Cart


Summit 32 X 120 Gap Bed Engine Lathe
Rohner Machinery Sales, Inc.
2430 Cypress Wy.
Fullerton, CA 92831
714-441-1527
714-441-1557
mail@rohnermachinery.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com